Distance from Banbasa to Wright
Banbasa → Wright
12,606 km
≈ 7,833 miles · 6,807 nautical miles
BanbasaWright
16 h 10 min
Flight (if direct)
7 d 14 h
Driving time (est.)
north
Direction (354°)
-11.5 h
Time difference
About this route
Spanning 12,606 km (7,833 miles), the route from Banbasa to Wright is a genuine long-haul journey crossing multiple time zones. Where a non-stop flight is available, it would take roughly 16 h 10 min — otherwise expect at least one connection.
The geographic midpoint of the route lies near Jince, Czech Republic.
| Metric | Value |
|---|---|
| Straight-line distance | 12,606 km / 7,833 mi / 6,807 nmi |
| Estimated road distance | 16,388 km / 10,183 mi |
| Estimated flight time | 16 h 10 min — if a direct flight operates (805 km/h cruise) |
| Estimated driving time | 7 d 14 h (90 km/h average) |
| Initial bearing | 354° — north |
| Geographic midpoint | Near Jince, Czech Republic |
| Time difference | Wright is -11:30 (UTC+05:30 → UTC-06:00) |
| Banbasa coordinates | 28.9913, 80.0761 |
| Wright coordinates | 37.2701, -92.4687 |
Flight and driving times are estimates. A direct flight may not be available between Banbasa and Wright — actual travel can require connections, and road routes are longer than the straight line.
↔ Reverse: Wright to Banbasa All distances from Banbasa All distances from Wright
Distance from Banbasa to places near Wright
Frequently asked questions
How far is Wright from Banbasa?
Wright is 12,606 km (7,833 miles) from Banbasa measured as a straight line (great-circle distance). The estimated road distance is about 16,388 km (10,183 mi).
How long is the flight from Banbasa to Wright?
If a direct flight operates between Banbasa and Wright, it would take approximately 16 h 10 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Banbasa and Wright?
Wright has 11.5 hours behind Banbasa. Banbasa uses UTC+05:30 and Wright uses UTC-06:00.
What is the halfway point between Banbasa and Wright?
The geographic midpoint between Banbasa and Wright is near Jince, Czech Republic, roughly 6,303 km from each city.
In which direction is Wright from Banbasa?
Wright lies to the north of Banbasa, at an initial bearing of 354°.