Distance from Banton to Pullman
Banton → Pullman
11,165 km
≈ 6,938 miles · 6,029 nautical miles
BantonPullman
14 h 22 min
Flight (if direct)
6 d 17 h
Driving time (est.)
northeast
Direction (37°)
-16 h
Time difference
About this route
Spanning 11,165 km (6,938 miles), the route from Banton to Pullman is a genuine long-haul journey crossing multiple time zones. Where a non-stop flight is available, it would take roughly 14 h 22 min — otherwise expect at least one connection.
The geographic midpoint of the route lies near Marked Tree, United States.
| Metric | Value |
|---|---|
| Straight-line distance | 11,165 km / 6,938 mi / 6,029 nmi |
| Estimated road distance | 14,515 km / 9,019 mi |
| Estimated flight time | 14 h 22 min — if a direct flight operates (805 km/h cruise) |
| Estimated driving time | 6 d 17 h (90 km/h average) |
| Initial bearing | 37° — northeast |
| Geographic midpoint | Near Marked Tree, United States |
| Time difference | Pullman is -16 h (UTC+08:00 → UTC-08:00) |
| Banton coordinates | 12.9546, 121.8251 |
| Pullman coordinates | 46.7313, -117.1796 |
Flight and driving times are estimates. A direct flight may not be available between Banton and Pullman — actual travel can require connections, and road routes are longer than the straight line.
↔ Reverse: Pullman to Banton All distances from Banton All distances from Pullman
Distance from Banton to places near Pullman
Frequently asked questions
How far is Pullman from Banton?
Pullman is 11,165 km (6,938 miles) from Banton measured as a straight line (great-circle distance). The estimated road distance is about 14,515 km (9,019 mi).
How long is the flight from Banton to Pullman?
If a direct flight operates between Banton and Pullman, it would take approximately 14 h 22 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Banton and Pullman?
Pullman has 16 hours behind Banton. Banton uses UTC+08:00 and Pullman uses UTC-08:00.
What is the halfway point between Banton and Pullman?
The geographic midpoint between Banton and Pullman is near Marked Tree, United States, roughly 5,583 km from each city.
In which direction is Pullman from Banton?
Pullman lies to the northeast of Banton, at an initial bearing of 37°.