Distance from Barnesville to Brezza

🇺🇸 Barnesville, United States🇮🇹 Brezza, Italy

Barnesville → Brezza
8,280 km
5,145 miles · 4,471 nautical miles
BarnesvilleBrezza
10 h 47 min
Flight (if direct)
4 d 23 h
Driving time (est.)
northeast
Direction (51°)
+6 h
Time difference

About this route

Spanning 8,280 km (5,145 miles), the route from Barnesville to Brezza is a genuine long-haul journey crossing multiple time zones. Where a non-stop flight is available, it would take roughly 10 h 47 min — otherwise expect at least one connection.

The geographic midpoint of the route lies near Mejit, Marshall Islands.

MetricValue
Straight-line distance8,280 km / 5,145 mi / 4,471 nmi
Estimated road distance10,764 km / 6,689 mi
Estimated flight time10 h 47 min — if a direct flight operates (805 km/h cruise)
Estimated driving time4 d 23 h (90 km/h average)
Initial bearing51° — northeast
Geographic midpointNear Mejit, Marshall Islands
Time differenceBrezza is +6 h (UTC-05:00 → UTC+01:00)
Barnesville coordinates33.0546, -84.1558
Brezza coordinates41.1107, 14.112

Flight and driving times are estimates. A direct flight may not be available between Barnesville and Brezza — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Brezza to Barnesville All distances from Barnesville All distances from Brezza

Frequently asked questions

How far is Brezza from Barnesville?
Brezza is 8,280 km (5,145 miles) from Barnesville measured as a straight line (great-circle distance). The estimated road distance is about 10,764 km (6,689 mi).
How long is the flight from Barnesville to Brezza?
If a direct flight operates between Barnesville and Brezza, it would take approximately 10 h 47 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Barnesville and Brezza?
Brezza has 6 hours ahead of Barnesville. Barnesville uses UTC-05:00 and Brezza uses UTC+01:00.
What is the halfway point between Barnesville and Brezza?
The geographic midpoint between Barnesville and Brezza is near Mejit, Marshall Islands, roughly 4,140 km from each city.
In which direction is Brezza from Barnesville?
Brezza lies to the northeast of Barnesville, at an initial bearing of 51°.