Distance from Brezza to Kladruby

🇮🇹 Brezza, Italy🇨🇿 Kladruby, Czech Republic

Brezza → Kladruby
961 km
597 miles · 519 nautical miles
BrezzaKladruby
1 h 42 min
Flight (if direct)
13 h 53 min
Driving time (est.)
north
Direction (355°)
0 h
Time difference

About this route

Travelling from Brezza to Kladruby covers 961 km (597 miles) on a great-circle path — a distance where flying saves many hours compared with the estimated 1,249 km by road.

The geographic midpoint of the route lies near Jince, Czech Republic.

MetricValue
Straight-line distance961 km / 597 mi / 519 nmi
Estimated road distance1,249 km / 776 mi
Estimated flight time1 h 42 min — if a direct flight operates (805 km/h cruise)
Estimated driving time13 h 53 min (90 km/h average)
Initial bearing355° — north
Geographic midpointNear Jince, Czech Republic
Time differenceSame time zone offset (UTC+01:00 → UTC+01:00)
Brezza coordinates41.1107, 14.112
Kladruby coordinates49.715, 12.9823

Flight and driving times are estimates. A direct flight may not be available between Brezza and Kladruby — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Kladruby to Brezza All distances from Brezza All distances from Kladruby

Frequently asked questions

How far is Kladruby from Brezza?
Kladruby is 961 km (597 miles) from Brezza measured as a straight line (great-circle distance). The estimated road distance is about 1,249 km (776 mi).
How long is the flight from Brezza to Kladruby?
If a direct flight operates between Brezza and Kladruby, it would take approximately 1 h 42 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Brezza and Kladruby?
Kladruby has the same time zone offset. Brezza uses UTC+01:00 and Kladruby uses UTC+01:00.
What is the halfway point between Brezza and Kladruby?
The geographic midpoint between Brezza and Kladruby is near Jince, Czech Republic, roughly 480 km from each city.
In which direction is Kladruby from Brezza?
Kladruby lies to the north of Brezza, at an initial bearing of 355°.