Distance from Crodo to Bee

🇮🇹 Crodo, Italy🇮🇹 Bee, Italy

Crodo → Bee
34 km
21 miles · 19 nautical miles
CrodoBee
33 min
Flight (if direct)
30 min
Driving time (est.)
southeast
Direction (145°)
0 h
Time difference

About this route

Crodo and Bee are close neighbours — just 34 km apart as the crow flies, a trip most people would make by road rather than by air.

The geographic midpoint of the route lies near Jince, Czech Republic.

MetricValue
Straight-line distance34 km / 21 mi / 19 nmi
Estimated road distance45 km / 28 mi
Estimated flight time33 min — if a direct flight operates (805 km/h cruise)
Estimated driving time30 min (90 km/h average)
Initial bearing145° — southeast
Geographic midpointNear Jince, Czech Republic
Time differenceSame time zone offset (UTC+01:00 → UTC+01:00)
Crodo coordinates46.2173, 8.3224
Bee coordinates45.9633, 8.5754

Flight and driving times are estimates. A direct flight may not be available between Crodo and Bee — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Bee to Crodo All distances from Crodo All distances from Bee

Frequently asked questions

How far is Bee from Crodo?
Bee is 34 km (21 miles) from Crodo measured as a straight line (great-circle distance). The estimated road distance is about 45 km (28 mi).
How long is the flight from Crodo to Bee?
If a direct flight operates between Crodo and Bee, it would take approximately 33 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Crodo and Bee?
Bee has the same time zone offset. Crodo uses UTC+01:00 and Bee uses UTC+01:00.
What is the halfway point between Crodo and Bee?
The geographic midpoint between Crodo and Bee is near Jince, Czech Republic, roughly 17 km from each city.
In which direction is Bee from Crodo?
Bee lies to the southeast of Crodo, at an initial bearing of 145°.