Distance from Cut to Oarda

🇷🇴 Cut, Romania🇷🇴 Oarda, Romania

Cut → Oarda
13 km
8 miles · 7 nautical miles
CutOarda
31 min
Flight (if direct)
11 min
Driving time (est.)
northwest
Direction (323°)
0 h
Time difference

About this route

Cut and Oarda are close neighbours — just 13 km apart as the crow flies, a trip most people would make by road rather than by air.

The geographic midpoint of the route lies near Nakagami-gun, Japan.

MetricValue
Straight-line distance13 km / 8 mi / 7 nmi
Estimated road distance17 km / 10 mi
Estimated flight time31 min — if a direct flight operates (805 km/h cruise)
Estimated driving time11 min (90 km/h average)
Initial bearing323° — northwest
Geographic midpointNear Nakagami-gun, Japan
Time differenceSame time zone offset (UTC+02:00 → UTC+02:00)
Cut coordinates45.9397, 23.6672
Oarda coordinates46.0333, 23.5667

Flight and driving times are estimates. A direct flight may not be available between Cut and Oarda — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Oarda to Cut All distances from Cut All distances from Oarda

Frequently asked questions

How far is Oarda from Cut?
Oarda is 13 km (8 miles) from Cut measured as a straight line (great-circle distance). The estimated road distance is about 17 km (10 mi).
How long is the flight from Cut to Oarda?
If a direct flight operates between Cut and Oarda, it would take approximately 31 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Cut and Oarda?
Oarda has the same time zone offset. Cut uses UTC+02:00 and Oarda uses UTC+02:00.
What is the halfway point between Cut and Oarda?
The geographic midpoint between Cut and Oarda is near Nakagami-gun, Japan, roughly 6 km from each city.
In which direction is Oarda from Cut?
Oarda lies to the northwest of Cut, at an initial bearing of 323°.