Distance from Eichenau to Plate

🇩🇪 Eichenau, Germany🇩🇪 Plate, Germany

Eichenau → Plate
599 km
372 miles · 323 nautical miles
EichenauPlate
1 h 15 min
Flight (if direct)
8 h 39 min
Driving time (est.)
north
Direction (1°)
0 h
Time difference

About this route

Travelling from Eichenau to Plate covers 599 km (372 miles) on a great-circle path — a distance where flying saves many hours compared with the estimated 779 km by road.

The geographic midpoint of the route lies near Jince, Czech Republic.

MetricValue
Straight-line distance599 km / 372 mi / 323 nmi
Estimated road distance779 km / 484 mi
Estimated flight time1 h 15 min — if a direct flight operates (805 km/h cruise)
Estimated driving time8 h 39 min (90 km/h average)
Initial bearing1° — north
Geographic midpointNear Jince, Czech Republic
Time differenceSame time zone offset (UTC+01:00 → UTC+01:00)
Eichenau coordinates48.1667, 11.3167
Plate coordinates53.5515, 11.5093

Flight and driving times are estimates. A direct flight may not be available between Eichenau and Plate — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Plate to Eichenau All distances from Eichenau All distances from Plate

Frequently asked questions

How far is Plate from Eichenau?
Plate is 599 km (372 miles) from Eichenau measured as a straight line (great-circle distance). The estimated road distance is about 779 km (484 mi).
How long is the flight from Eichenau to Plate?
If a direct flight operates between Eichenau and Plate, it would take approximately 1 h 15 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Eichenau and Plate?
Plate has the same time zone offset. Eichenau uses UTC+01:00 and Plate uses UTC+01:00.
What is the halfway point between Eichenau and Plate?
The geographic midpoint between Eichenau and Plate is near Jince, Czech Republic, roughly 299 km from each city.
In which direction is Plate from Eichenau?
Plate lies to the north of Eichenau, at an initial bearing of 1°.