Distance from Enebakk to Parkstein
Enebakk → Parkstein
1,117 km
≈ 694 miles · 603 nautical miles
EnebakkParkstein
1 h 53 min
Flight (if direct)
16 h 8 min
Driving time (est.)
south
Direction (177°)
0 h
Time difference
About this route
Travelling from Enebakk to Parkstein covers 1,117 km (694 miles) on a great-circle path — a distance where flying saves many hours compared with the estimated 1,453 km by road.
The geographic midpoint of the route lies near Jince, Czech Republic.
| Metric | Value |
|---|---|
| Straight-line distance | 1,117 km / 694 mi / 603 nmi |
| Estimated road distance | 1,453 km / 903 mi |
| Estimated flight time | 1 h 53 min — if a direct flight operates (805 km/h cruise) |
| Estimated driving time | 16 h 8 min (90 km/h average) |
| Initial bearing | 177° — south |
| Geographic midpoint | Near Jince, Czech Republic |
| Time difference | Same time zone offset (UTC+01:00 → UTC+01:00) |
| Enebakk coordinates | 59.7645, 11.1449 |
| Parkstein coordinates | 49.7292, 12.0676 |
Flight and driving times are estimates. A direct flight may not be available between Enebakk and Parkstein — actual travel can require connections, and road routes are longer than the straight line.
↔ Reverse: Parkstein to Enebakk All distances from Enebakk All distances from Parkstein
Distance from Enebakk to places near Parkstein
Frequently asked questions
How far is Parkstein from Enebakk?
Parkstein is 1,117 km (694 miles) from Enebakk measured as a straight line (great-circle distance). The estimated road distance is about 1,453 km (903 mi).
How long is the flight from Enebakk to Parkstein?
If a direct flight operates between Enebakk and Parkstein, it would take approximately 1 h 53 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Enebakk and Parkstein?
Parkstein has the same time zone offset. Enebakk uses UTC+01:00 and Parkstein uses UTC+01:00.
What is the halfway point between Enebakk and Parkstein?
The geographic midpoint between Enebakk and Parkstein is near Jince, Czech Republic, roughly 559 km from each city.
In which direction is Parkstein from Enebakk?
Parkstein lies to the south of Enebakk, at an initial bearing of 177°.