Distance from Ganapi to Aartselaar

🇵🇭 Ganapi, Philippines🇧🇪 Aartselaar, Belgium

Ganapi → Aartselaar
10,303 km
6,402 miles · 5,563 nautical miles
GanapiAartselaar
13 h 18 min
Flight (if direct)
6 d 4 h
Driving time (est.)
northwest
Direction (326°)
-7 h
Time difference

About this route

Spanning 10,303 km (6,402 miles), the route from Ganapi to Aartselaar is a genuine long-haul journey crossing multiple time zones. Where a non-stop flight is available, it would take roughly 13 h 18 min — otherwise expect at least one connection.

The geographic midpoint of the route lies near Kekaha, United States.

MetricValue
Straight-line distance10,303 km / 6,402 mi / 5,563 nmi
Estimated road distance13,394 km / 8,322 mi
Estimated flight time13 h 18 min — if a direct flight operates (805 km/h cruise)
Estimated driving time6 d 4 h (90 km/h average)
Initial bearing326° — northwest
Geographic midpointNear Kekaha, United States
Time differenceAartselaar is -7 h (UTC+08:00 → UTC+01:00)
Ganapi coordinates17.2017, 121.8653
Aartselaar coordinates51.1341, 4.3868

Flight and driving times are estimates. A direct flight may not be available between Ganapi and Aartselaar — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Aartselaar to Ganapi All distances from Ganapi All distances from Aartselaar

Frequently asked questions

How far is Aartselaar from Ganapi?
Aartselaar is 10,303 km (6,402 miles) from Ganapi measured as a straight line (great-circle distance). The estimated road distance is about 13,394 km (8,322 mi).
How long is the flight from Ganapi to Aartselaar?
If a direct flight operates between Ganapi and Aartselaar, it would take approximately 13 h 18 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Ganapi and Aartselaar?
Aartselaar has 7 hours behind Ganapi. Ganapi uses UTC+08:00 and Aartselaar uses UTC+01:00.
What is the halfway point between Ganapi and Aartselaar?
The geographic midpoint between Ganapi and Aartselaar is near Kekaha, United States, roughly 5,151 km from each city.
In which direction is Aartselaar from Ganapi?
Aartselaar lies to the northwest of Ganapi, at an initial bearing of 326°.