Distance from Hasparren to Ballwin
Hasparren → Ballwin
7,133 km
≈ 4,432 miles · 3,852 nautical miles
HasparrenBallwin
9 h 22 min
Flight (if direct)
4 d 7 h
Driving time (est.)
west-northwest
Direction (300°)
-7 h
Time difference
About this route
Spanning 7,133 km (4,432 miles), the route from Hasparren to Ballwin is a genuine long-haul journey crossing multiple time zones. Where a non-stop flight is available, it would take roughly 9 h 22 min — otherwise expect at least one connection.
The geographic midpoint of the route lies near Jince, Czech Republic.
| Metric | Value |
|---|---|
| Straight-line distance | 7,133 km / 4,432 mi / 3,852 nmi |
| Estimated road distance | 9,273 km / 5,762 mi |
| Estimated flight time | 9 h 22 min — if a direct flight operates (805 km/h cruise) |
| Estimated driving time | 4 d 7 h (90 km/h average) |
| Initial bearing | 300° — west-northwest |
| Geographic midpoint | Near Jince, Czech Republic |
| Time difference | Ballwin is -7 h (UTC+01:00 → UTC-06:00) |
| Hasparren coordinates | 43.3838, -1.305 |
| Ballwin coordinates | 38.5951, -90.5462 |
Flight and driving times are estimates. A direct flight may not be available between Hasparren and Ballwin — actual travel can require connections, and road routes are longer than the straight line.
↔ Reverse: Ballwin to Hasparren All distances from Hasparren All distances from Ballwin
Distance from Hasparren to places near Ballwin
Frequently asked questions
How far is Ballwin from Hasparren?
Ballwin is 7,133 km (4,432 miles) from Hasparren measured as a straight line (great-circle distance). The estimated road distance is about 9,273 km (5,762 mi).
How long is the flight from Hasparren to Ballwin?
If a direct flight operates between Hasparren and Ballwin, it would take approximately 9 h 22 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Hasparren and Ballwin?
Ballwin has 7 hours behind Hasparren. Hasparren uses UTC+01:00 and Ballwin uses UTC-06:00.
What is the halfway point between Hasparren and Ballwin?
The geographic midpoint between Hasparren and Ballwin is near Jince, Czech Republic, roughly 3,567 km from each city.
In which direction is Ballwin from Hasparren?
Ballwin lies to the west-northwest of Hasparren, at an initial bearing of 300°.