Distance from Hernals to Malling
Hernals → Malling
961 km
≈ 597 miles · 519 nautical miles
HernalsMalling
1 h 42 min
Flight (if direct)
13 h 53 min
Driving time (est.)
north-northwest
Direction (337°)
0 h
Time difference
About this route
Travelling from Hernals to Malling covers 961 km (597 miles) on a great-circle path — a distance where flying saves many hours compared with the estimated 1,249 km by road.
The geographic midpoint of the route lies near Jince, Czech Republic.
| Metric | Value |
|---|---|
| Straight-line distance | 961 km / 597 mi / 519 nmi |
| Estimated road distance | 1,249 km / 776 mi |
| Estimated flight time | 1 h 42 min — if a direct flight operates (805 km/h cruise) |
| Estimated driving time | 13 h 53 min (90 km/h average) |
| Initial bearing | 337° — north-northwest |
| Geographic midpoint | Near Jince, Czech Republic |
| Time difference | Same time zone offset (UTC+01:00 → UTC+01:00) |
| Hernals coordinates | 48.2333, 16.2667 |
| Malling coordinates | 56.0363, 10.1963 |
Flight and driving times are estimates. A direct flight may not be available between Hernals and Malling — actual travel can require connections, and road routes are longer than the straight line.
↔ Reverse: Malling to Hernals All distances from Hernals All distances from Malling
Distance from Hernals to places near Malling
Frequently asked questions
How far is Malling from Hernals?
Malling is 961 km (597 miles) from Hernals measured as a straight line (great-circle distance). The estimated road distance is about 1,249 km (776 mi).
How long is the flight from Hernals to Malling?
If a direct flight operates between Hernals and Malling, it would take approximately 1 h 42 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Hernals and Malling?
Malling has the same time zone offset. Hernals uses UTC+01:00 and Malling uses UTC+01:00.
What is the halfway point between Hernals and Malling?
The geographic midpoint between Hernals and Malling is near Jince, Czech Republic, roughly 480 km from each city.
In which direction is Malling from Hernals?
Malling lies to the north-northwest of Hernals, at an initial bearing of 337°.