Distance from Lapaz to Orting
Lapaz → Orting
10,840 km
≈ 6,735 miles · 5,853 nautical miles
LapazOrting
13 h 58 min
Flight (if direct)
6 d 12 h
Driving time (est.)
northeast
Direction (39°)
-16 h
Time difference
About this route
Spanning 10,840 km (6,735 miles), the route from Lapaz to Orting is a genuine long-haul journey crossing multiple time zones. Where a non-stop flight is available, it would take roughly 13 h 58 min — otherwise expect at least one connection.
The geographic midpoint of the route lies near Jince, Czech Republic.
| Metric | Value |
|---|---|
| Straight-line distance | 10,840 km / 6,735 mi / 5,853 nmi |
| Estimated road distance | 14,091 km / 8,756 mi |
| Estimated flight time | 13 h 58 min — if a direct flight operates (805 km/h cruise) |
| Estimated driving time | 6 d 12 h (90 km/h average) |
| Initial bearing | 39° — northeast |
| Geographic midpoint | Near Jince, Czech Republic |
| Time difference | Orting is -16 h (UTC+08:00 → UTC-08:00) |
| Lapaz coordinates | 10.9887, 123.9797 |
| Orting coordinates | 47.0979, -122.2043 |
Flight and driving times are estimates. A direct flight may not be available between Lapaz and Orting — actual travel can require connections, and road routes are longer than the straight line.
↔ Reverse: Orting to Lapaz All distances from Lapaz All distances from Orting
Distance from Lapaz to places near Orting
Frequently asked questions
How far is Orting from Lapaz?
Orting is 10,840 km (6,735 miles) from Lapaz measured as a straight line (great-circle distance). The estimated road distance is about 14,091 km (8,756 mi).
How long is the flight from Lapaz to Orting?
If a direct flight operates between Lapaz and Orting, it would take approximately 13 h 58 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Lapaz and Orting?
Orting has 16 hours behind Lapaz. Lapaz uses UTC+08:00 and Orting uses UTC-08:00.
What is the halfway point between Lapaz and Orting?
The geographic midpoint between Lapaz and Orting is near Jince, Czech Republic, roughly 5,420 km from each city.
In which direction is Orting from Lapaz?
Orting lies to the northeast of Lapaz, at an initial bearing of 39°.