Distance from Loo to Rapla

🇪🇪 Loo, Estonia🇪🇪 Rapla, Estonia

Loo → Rapla
48 km
30 miles · 26 nautical miles
LooRapla
34 min
Flight (if direct)
42 min
Driving time (est.)
south
Direction (191°)
0 h
Time difference

About this route

Loo and Rapla are close neighbours — just 48 km apart as the crow flies, a trip most people would make by road rather than by air.

The geographic midpoint of the route lies near Jince, Czech Republic.

MetricValue
Straight-line distance48 km / 30 mi / 26 nmi
Estimated road distance62 km / 39 mi
Estimated flight time34 min — if a direct flight operates (805 km/h cruise)
Estimated driving time42 min (90 km/h average)
Initial bearing191° — south
Geographic midpointNear Jince, Czech Republic
Time differenceSame time zone offset (UTC+02:00 → UTC+02:00)
Loo coordinates59.4312, 24.9495
Rapla coordinates59.0072, 24.7928

Flight and driving times are estimates. A direct flight may not be available between Loo and Rapla — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Rapla to Loo All distances from Loo All distances from Rapla

Frequently asked questions

How far is Rapla from Loo?
Rapla is 48 km (30 miles) from Loo measured as a straight line (great-circle distance). The estimated road distance is about 62 km (39 mi).
How long is the flight from Loo to Rapla?
If a direct flight operates between Loo and Rapla, it would take approximately 34 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Loo and Rapla?
Rapla has the same time zone offset. Loo uses UTC+02:00 and Rapla uses UTC+02:00.
What is the halfway point between Loo and Rapla?
The geographic midpoint between Loo and Rapla is near Jince, Czech Republic, roughly 24 km from each city.
In which direction is Rapla from Loo?
Rapla lies to the south of Loo, at an initial bearing of 191°.