Distance from Lufa to Lae

🇵🇬 Lufa, Papua New Guinea🇵🇬 Lae, Papua New Guinea

Lufa → Lae
175 km
109 miles · 95 nautical miles
LufaLae
43 min
Flight (if direct)
2 h 32 min
Driving time (est.)
east
Direction (92°)
0 h
Time difference

About this route

Lufa and Lae sit 175 km apart, a classic regional journey. That is roughly 109 miles measured in a straight line between the two city centres.

The geographic midpoint of the route lies near Hoboksar, China.

MetricValue
Straight-line distance175 km / 109 mi / 95 nmi
Estimated road distance228 km / 141 mi
Estimated flight time43 min — if a direct flight operates (805 km/h cruise)
Estimated driving time2 h 32 min (90 km/h average)
Initial bearing92° — east
Geographic midpointNear Hoboksar, China
Time differenceSame time zone offset (UTC+11:00 → UTC+11:00)
Lufa coordinates-6.45, 145.25
Lae coordinates-6.5, 146.8333

Flight and driving times are estimates. A direct flight may not be available between Lufa and Lae — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Lae to Lufa All distances from Lufa All distances from Lae

Frequently asked questions

How far is Lae from Lufa?
Lae is 175 km (109 miles) from Lufa measured as a straight line (great-circle distance). The estimated road distance is about 228 km (141 mi).
How long is the flight from Lufa to Lae?
If a direct flight operates between Lufa and Lae, it would take approximately 43 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Lufa and Lae?
Lae has the same time zone offset. Lufa uses UTC+11:00 and Lae uses UTC+11:00.
What is the halfway point between Lufa and Lae?
The geographic midpoint between Lufa and Lae is near Hoboksar, China, roughly 88 km from each city.
In which direction is Lae from Lufa?
Lae lies to the east of Lufa, at an initial bearing of 92°.