Distance from McLoud to Rapone
McLoud → Rapone
9,097 km
≈ 5,653 miles · 4,912 nautical miles
McLoudRapone
11 h 48 min
Flight (if direct)
5 d 11 h
Driving time (est.)
northeast
Direction (45°)
+7 h
Time difference
About this route
Spanning 9,097 km (5,653 miles), the route from McLoud to Rapone is a genuine long-haul journey crossing multiple time zones. Where a non-stop flight is available, it would take roughly 11 h 48 min — otherwise expect at least one connection.
The geographic midpoint of the route lies near Christiansø, Denmark.
| Metric | Value |
|---|---|
| Straight-line distance | 9,097 km / 5,653 mi / 4,912 nmi |
| Estimated road distance | 11,826 km / 7,348 mi |
| Estimated flight time | 11 h 48 min — if a direct flight operates (805 km/h cruise) |
| Estimated driving time | 5 d 11 h (90 km/h average) |
| Initial bearing | 45° — northeast |
| Geographic midpoint | Near Christiansø, Denmark |
| Time difference | Rapone is +7 h (UTC-06:00 → UTC+01:00) |
| McLoud coordinates | 35.4359, -97.0914 |
| Rapone coordinates | 40.8471, 15.4982 |
Flight and driving times are estimates. A direct flight may not be available between McLoud and Rapone — actual travel can require connections, and road routes are longer than the straight line.
↔ Reverse: Rapone to McLoud All distances from McLoud All distances from Rapone
Distance from McLoud to places near Rapone
Frequently asked questions
How far is Rapone from McLoud?
Rapone is 9,097 km (5,653 miles) from McLoud measured as a straight line (great-circle distance). The estimated road distance is about 11,826 km (7,348 mi).
How long is the flight from McLoud to Rapone?
If a direct flight operates between McLoud and Rapone, it would take approximately 11 h 48 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between McLoud and Rapone?
Rapone has 7 hours ahead of McLoud. McLoud uses UTC-06:00 and Rapone uses UTC+01:00.
What is the halfway point between McLoud and Rapone?
The geographic midpoint between McLoud and Rapone is near Christiansø, Denmark, roughly 4,548 km from each city.
In which direction is Rapone from McLoud?
Rapone lies to the northeast of McLoud, at an initial bearing of 45°.