Distance from Mitchell to Regency Downs
Mitchell → Regency Downs
14,572 km
≈ 9,054 miles · 7,868 nautical miles
MitchellRegency Downs
18 h 36 min
Flight (if direct)
8 d 18 h
Driving time (est.)
west
Direction (259°)
+15 h
Time difference
About this route
Spanning 14,572 km (9,054 miles), the route from Mitchell to Regency Downs is a genuine long-haul journey crossing multiple time zones. Where a non-stop flight is available, it would take roughly 18 h 36 min — otherwise expect at least one connection.
The geographic midpoint of the route lies near Jince, Czech Republic.
| Metric | Value |
|---|---|
| Straight-line distance | 14,572 km / 9,054 mi / 7,868 nmi |
| Estimated road distance | 18,943 km / 11,771 mi |
| Estimated flight time | 18 h 36 min — if a direct flight operates (805 km/h cruise) |
| Estimated driving time | 8 d 18 h (90 km/h average) |
| Initial bearing | 259° — west |
| Geographic midpoint | Near Jince, Czech Republic |
| Time difference | Regency Downs is +15 h (UTC-05:00 → UTC+10:00) |
| Mitchell coordinates | 31.2253, -84.1943 |
| Regency Downs coordinates | -27.5336, 152.4405 |
Flight and driving times are estimates. A direct flight may not be available between Mitchell and Regency Downs — actual travel can require connections, and road routes are longer than the straight line.
↔ Reverse: Regency Downs to Mitchell All distances from Mitchell All distances from Regency Downs
Distance from Mitchell to places near Regency Downs
Frequently asked questions
How far is Regency Downs from Mitchell?
Regency Downs is 14,572 km (9,054 miles) from Mitchell measured as a straight line (great-circle distance). The estimated road distance is about 18,943 km (11,771 mi).
How long is the flight from Mitchell to Regency Downs?
If a direct flight operates between Mitchell and Regency Downs, it would take approximately 18 h 36 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Mitchell and Regency Downs?
Regency Downs has 15 hours ahead of Mitchell. Mitchell uses UTC-05:00 and Regency Downs uses UTC+10:00.
What is the halfway point between Mitchell and Regency Downs?
The geographic midpoint between Mitchell and Regency Downs is near Jince, Czech Republic, roughly 7,286 km from each city.
In which direction is Regency Downs from Mitchell?
Regency Downs lies to the west of Mitchell, at an initial bearing of 259°.