Distance from Multan District to Sevan

🇵🇰 Multan District, Pakistan🇦🇲 Sevan, Armenia

Multan District → Sevan
2,675 km
1,662 miles · 1,444 nautical miles
Multan DistrictSevan
3 h 49 min
Flight (if direct)
1 d 14 h
Driving time (est.)
west-northwest
Direction (303°)
-1 h
Time difference

About this route

The straight-line distance from Multan District to Sevan is 2,675 km (1,662 miles). At this scale, air travel is the practical choice — if a direct flight operates, it would take around 3 h 49 min.

The geographic midpoint of the route lies near Jince, Czech Republic.

MetricValue
Straight-line distance2,675 km / 1,662 mi / 1,444 nmi
Estimated road distance3,478 km / 2,161 mi
Estimated flight time3 h 49 min — if a direct flight operates (805 km/h cruise)
Estimated driving time1 d 14 h (90 km/h average)
Initial bearing303° — west-northwest
Geographic midpointNear Jince, Czech Republic
Time differenceSevan is -1 h (UTC+05:00 → UTC+04:00)
Multan District coordinates30.0833, 71.6667
Sevan coordinates40.5473, 44.9417

Flight and driving times are estimates. A direct flight may not be available between Multan District and Sevan — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Sevan to Multan District All distances from Multan District All distances from Sevan

Frequently asked questions

How far is Sevan from Multan District?
Sevan is 2,675 km (1,662 miles) from Multan District measured as a straight line (great-circle distance). The estimated road distance is about 3,478 km (2,161 mi).
How long is the flight from Multan District to Sevan?
If a direct flight operates between Multan District and Sevan, it would take approximately 3 h 49 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Multan District and Sevan?
Sevan has 1 hour behind Multan District. Multan District uses UTC+05:00 and Sevan uses UTC+04:00.
What is the halfway point between Multan District and Sevan?
The geographic midpoint between Multan District and Sevan is near Jince, Czech Republic, roughly 1,338 km from each city.
In which direction is Sevan from Multan District?
Sevan lies to the west-northwest of Multan District, at an initial bearing of 303°.