Distance from Oderzo to Lupara
🇮🇹 Oderzo, Italy→🇮🇹 Lupara, Italy
Oderzo → Lupara
482 km
≈ 299 miles · 260 nautical miles
OderzoLupara
1 h 6 min
Flight (if direct)
6 h 58 min
Driving time (est.)
south-southeast
Direction (157°)
0 h
Time difference
About this route
Travelling from Oderzo to Lupara covers 482 km (299 miles) on a great-circle path — a distance where flying saves many hours compared with the estimated 626 km by road.
The geographic midpoint of the route lies near Jince, Czech Republic.
| Metric | Value |
|---|---|
| Straight-line distance | 482 km / 299 mi / 260 nmi |
| Estimated road distance | 626 km / 389 mi |
| Estimated flight time | 1 h 6 min — if a direct flight operates (805 km/h cruise) |
| Estimated driving time | 6 h 58 min (90 km/h average) |
| Initial bearing | 157° — south-southeast |
| Geographic midpoint | Near Jince, Czech Republic |
| Time difference | Same time zone offset (UTC+01:00 → UTC+01:00) |
| Oderzo coordinates | 45.7811, 12.4944 |
| Lupara coordinates | 41.7614, 14.7339 |
Flight and driving times are estimates. A direct flight may not be available between Oderzo and Lupara — actual travel can require connections, and road routes are longer than the straight line.
↔ Reverse: Lupara to Oderzo All distances from Oderzo All distances from Lupara
Distance from Oderzo to places near Lupara
Frequently asked questions
How far is Lupara from Oderzo?
Lupara is 482 km (299 miles) from Oderzo measured as a straight line (great-circle distance). The estimated road distance is about 626 km (389 mi).
How long is the flight from Oderzo to Lupara?
If a direct flight operates between Oderzo and Lupara, it would take approximately 1 h 6 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Oderzo and Lupara?
Lupara has the same time zone offset. Oderzo uses UTC+01:00 and Lupara uses UTC+01:00.
What is the halfway point between Oderzo and Lupara?
The geographic midpoint between Oderzo and Lupara is near Jince, Czech Republic, roughly 241 km from each city.
In which direction is Lupara from Oderzo?
Lupara lies to the south-southeast of Oderzo, at an initial bearing of 157°.