Distance from Ogunquit to Luzerne County

🇺🇸 Ogunquit, United States🇺🇸 Luzerne County, United States

Ogunquit → Luzerne County
500 km
311 miles · 270 nautical miles
OgunquitLuzerne County
1 h 7 min
Flight (if direct)
7 h 13 min
Driving time (est.)
west-southwest
Direction (244°)
0 h
Time difference

About this route

Travelling from Ogunquit to Luzerne County covers 500 km (311 miles) on a great-circle path — a distance where flying saves many hours compared with the estimated 650 km by road.

The geographic midpoint of the route lies near Kekaha, United States.

MetricValue
Straight-line distance500 km / 311 mi / 270 nmi
Estimated road distance650 km / 404 mi
Estimated flight time1 h 7 min — if a direct flight operates (805 km/h cruise)
Estimated driving time7 h 13 min (90 km/h average)
Initial bearing244° — west-southwest
Geographic midpointNear Kekaha, United States
Time differenceSame time zone offset (UTC-05:00 → UTC-05:00)
Ogunquit coordinates43.249, -70.5992
Luzerne County coordinates41.177, -75.989

Flight and driving times are estimates. A direct flight may not be available between Ogunquit and Luzerne County — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Luzerne County to Ogunquit All distances from Ogunquit All distances from Luzerne County

Frequently asked questions

How far is Luzerne County from Ogunquit?
Luzerne County is 500 km (311 miles) from Ogunquit measured as a straight line (great-circle distance). The estimated road distance is about 650 km (404 mi).
How long is the flight from Ogunquit to Luzerne County?
If a direct flight operates between Ogunquit and Luzerne County, it would take approximately 1 h 7 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Ogunquit and Luzerne County?
Luzerne County has the same time zone offset. Ogunquit uses UTC-05:00 and Luzerne County uses UTC-05:00.
What is the halfway point between Ogunquit and Luzerne County?
The geographic midpoint between Ogunquit and Luzerne County is near Kekaha, United States, roughly 250 km from each city.
In which direction is Luzerne County from Ogunquit?
Luzerne County lies to the west-southwest of Ogunquit, at an initial bearing of 244°.