Distance from Ormoc to Oberding
Ormoc → Oberding
10,697 km
≈ 6,647 miles · 5,776 nautical miles
OrmocOberding
13 h 47 min
Flight (if direct)
6 d 10 h
Driving time (est.)
northwest
Direction (322°)
-7 h
Time difference
About this route
Spanning 10,697 km (6,647 miles), the route from Ormoc to Oberding is a genuine long-haul journey crossing multiple time zones. Where a non-stop flight is available, it would take roughly 13 h 47 min — otherwise expect at least one connection.
The geographic midpoint of the route lies near Jince, Czech Republic.
| Metric | Value |
|---|---|
| Straight-line distance | 10,697 km / 6,647 mi / 5,776 nmi |
| Estimated road distance | 13,906 km / 8,640 mi |
| Estimated flight time | 13 h 47 min — if a direct flight operates (805 km/h cruise) |
| Estimated driving time | 6 d 10 h (90 km/h average) |
| Initial bearing | 322° — northwest |
| Geographic midpoint | Near Jince, Czech Republic |
| Time difference | Oberding is -7 h (UTC+08:00 → UTC+01:00) |
| Ormoc coordinates | 11.0508, 124.4755 |
| Oberding coordinates | 48.3167, 11.85 |
Flight and driving times are estimates. A direct flight may not be available between Ormoc and Oberding — actual travel can require connections, and road routes are longer than the straight line.
↔ Reverse: Oberding to Ormoc All distances from Ormoc All distances from Oberding
Distance from Ormoc to places near Oberding
Frequently asked questions
How far is Oberding from Ormoc?
Oberding is 10,697 km (6,647 miles) from Ormoc measured as a straight line (great-circle distance). The estimated road distance is about 13,906 km (8,640 mi).
How long is the flight from Ormoc to Oberding?
If a direct flight operates between Ormoc and Oberding, it would take approximately 13 h 47 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Ormoc and Oberding?
Oberding has 7 hours behind Ormoc. Ormoc uses UTC+08:00 and Oberding uses UTC+01:00.
What is the halfway point between Ormoc and Oberding?
The geographic midpoint between Ormoc and Oberding is near Jince, Czech Republic, roughly 5,348 km from each city.
In which direction is Oberding from Ormoc?
Oberding lies to the northwest of Ormoc, at an initial bearing of 322°.