Distance from Parkstein to Danzhou

🇩🇪 Parkstein, Germany🇨🇳 Danzhou, China

Parkstein → Danzhou
8,869 km
5,511 miles · 4,789 nautical miles
ParksteinDanzhou
11 h 31 min
Flight (if direct)
5 d 8 h
Driving time (est.)
east-northeast
Direction (72°)
+7 h
Time difference

About this route

Spanning 8,869 km (5,511 miles), the route from Parkstein to Danzhou is a genuine long-haul journey crossing multiple time zones. Where a non-stop flight is available, it would take roughly 11 h 31 min — otherwise expect at least one connection.

The geographic midpoint of the route lies near Jince, Czech Republic.

MetricValue
Straight-line distance8,869 km / 5,511 mi / 4,789 nmi
Estimated road distance11,530 km / 7,164 mi
Estimated flight time11 h 31 min — if a direct flight operates (805 km/h cruise)
Estimated driving time5 d 8 h (90 km/h average)
Initial bearing72° — east-northeast
Geographic midpointNear Jince, Czech Republic
Time differenceDanzhou is +7 h (UTC+01:00 → UTC+08:00)
Parkstein coordinates49.7292, 12.0676
Danzhou coordinates19.5689, 109.4044

Flight and driving times are estimates. A direct flight may not be available between Parkstein and Danzhou — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Danzhou to Parkstein All distances from Parkstein All distances from Danzhou

Frequently asked questions

How far is Danzhou from Parkstein?
Danzhou is 8,869 km (5,511 miles) from Parkstein measured as a straight line (great-circle distance). The estimated road distance is about 11,530 km (7,164 mi).
How long is the flight from Parkstein to Danzhou?
If a direct flight operates between Parkstein and Danzhou, it would take approximately 11 h 31 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Parkstein and Danzhou?
Danzhou has 7 hours ahead of Parkstein. Parkstein uses UTC+01:00 and Danzhou uses UTC+08:00.
What is the halfway point between Parkstein and Danzhou?
The geographic midpoint between Parkstein and Danzhou is near Jince, Czech Republic, roughly 4,434 km from each city.
In which direction is Danzhou from Parkstein?
Danzhou lies to the east-northeast of Parkstein, at an initial bearing of 72°.