Distance from Parkstein to Sint-Genesius-Rode

🇩🇪 Parkstein, Germany🇧🇪 Sint-Genesius-Rode, Belgium

Parkstein → Sint-Genesius-Rode
560 km
348 miles · 302 nautical miles
ParksteinSint-Genesius-Rode
1 h 12 min
Flight (if direct)
8 h 5 min
Driving time (est.)
west-northwest
Direction (285°)
0 h
Time difference

About this route

Travelling from Parkstein to Sint-Genesius-Rode covers 560 km (348 miles) on a great-circle path — a distance where flying saves many hours compared with the estimated 727 km by road.

The geographic midpoint of the route lies near Hoboksar, China.

MetricValue
Straight-line distance560 km / 348 mi / 302 nmi
Estimated road distance727 km / 452 mi
Estimated flight time1 h 12 min — if a direct flight operates (805 km/h cruise)
Estimated driving time8 h 5 min (90 km/h average)
Initial bearing285° — west-northwest
Geographic midpointNear Hoboksar, China
Time differenceSame time zone offset (UTC+01:00 → UTC+01:00)
Parkstein coordinates49.7292, 12.0676
Sint-Genesius-Rode coordinates50.7465, 4.3575

Flight and driving times are estimates. A direct flight may not be available between Parkstein and Sint-Genesius-Rode — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Sint-Genesius-Rode to Parkstein All distances from Parkstein All distances from Sint-Genesius-Rode

Frequently asked questions

How far is Sint-Genesius-Rode from Parkstein?
Sint-Genesius-Rode is 560 km (348 miles) from Parkstein measured as a straight line (great-circle distance). The estimated road distance is about 727 km (452 mi).
How long is the flight from Parkstein to Sint-Genesius-Rode?
If a direct flight operates between Parkstein and Sint-Genesius-Rode, it would take approximately 1 h 12 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Parkstein and Sint-Genesius-Rode?
Sint-Genesius-Rode has the same time zone offset. Parkstein uses UTC+01:00 and Sint-Genesius-Rode uses UTC+01:00.
What is the halfway point between Parkstein and Sint-Genesius-Rode?
The geographic midpoint between Parkstein and Sint-Genesius-Rode is near Hoboksar, China, roughly 280 km from each city.
In which direction is Sint-Genesius-Rode from Parkstein?
Sint-Genesius-Rode lies to the west-northwest of Parkstein, at an initial bearing of 285°.