Distance from Patrick to Mill Hall
Patrick → Mill Hall
549 km
≈ 341 miles · 296 nautical miles
PatrickMill Hall
1 h 11 min
Flight (if direct)
7 h 56 min
Driving time (est.)
north-northeast
Direction (25°)
0 h
Time difference
About this route
Travelling from Patrick to Mill Hall covers 549 km (341 miles) on a great-circle path — a distance where flying saves many hours compared with the estimated 713 km by road.
The geographic midpoint of the route lies near Jimsar, China.
| Metric | Value |
|---|---|
| Straight-line distance | 549 km / 341 mi / 296 nmi |
| Estimated road distance | 713 km / 443 mi |
| Estimated flight time | 1 h 11 min — if a direct flight operates (805 km/h cruise) |
| Estimated driving time | 7 h 56 min (90 km/h average) |
| Initial bearing | 25° — north-northeast |
| Geographic midpoint | Near Jimsar, China |
| Time difference | Same time zone offset (UTC-05:00 → UTC-05:00) |
| Patrick coordinates | 36.6783, -80.2844 |
| Mill Hall coordinates | 41.1073, -77.4844 |
Flight and driving times are estimates. A direct flight may not be available between Patrick and Mill Hall — actual travel can require connections, and road routes are longer than the straight line.
↔ Reverse: Mill Hall to Patrick All distances from Patrick All distances from Mill Hall
Distance from Patrick to places near Mill Hall
Frequently asked questions
How far is Mill Hall from Patrick?
Mill Hall is 549 km (341 miles) from Patrick measured as a straight line (great-circle distance). The estimated road distance is about 713 km (443 mi).
How long is the flight from Patrick to Mill Hall?
If a direct flight operates between Patrick and Mill Hall, it would take approximately 1 h 11 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Patrick and Mill Hall?
Mill Hall has the same time zone offset. Patrick uses UTC-05:00 and Mill Hall uses UTC-05:00.
What is the halfway point between Patrick and Mill Hall?
The geographic midpoint between Patrick and Mill Hall is near Jimsar, China, roughly 274 km from each city.
In which direction is Mill Hall from Patrick?
Mill Hall lies to the north-northeast of Patrick, at an initial bearing of 25°.