Distance from Piea to Doubleview

🇮🇹 Piea, Italy🇦🇺 Doubleview, Australia

Piea → Doubleview
13,766 km
8,554 miles · 7,433 nautical miles
PieaDoubleview
17 h 36 min
Flight (if direct)
8 d 6 h
Driving time (est.)
east-southeast
Direction (103°)
+7 h
Time difference

About this route

Spanning 13,766 km (8,554 miles), the route from Piea to Doubleview is a genuine long-haul journey crossing multiple time zones. Where a non-stop flight is available, it would take roughly 17 h 36 min — otherwise expect at least one connection.

The geographic midpoint of the route lies near Puerto Villamil, Ecuador.

MetricValue
Straight-line distance13,766 km / 8,554 mi / 7,433 nmi
Estimated road distance17,896 km / 11,120 mi
Estimated flight time17 h 36 min — if a direct flight operates (805 km/h cruise)
Estimated driving time8 d 6 h (90 km/h average)
Initial bearing103° — east-southeast
Geographic midpointNear Puerto Villamil, Ecuador
Time differenceDoubleview is +7 h (UTC+01:00 → UTC+08:00)
Piea coordinates45.0271, 8.0715
Doubleview coordinates-31.8963, 115.7816

Flight and driving times are estimates. A direct flight may not be available between Piea and Doubleview — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Doubleview to Piea All distances from Piea All distances from Doubleview

Frequently asked questions

How far is Doubleview from Piea?
Doubleview is 13,766 km (8,554 miles) from Piea measured as a straight line (great-circle distance). The estimated road distance is about 17,896 km (11,120 mi).
How long is the flight from Piea to Doubleview?
If a direct flight operates between Piea and Doubleview, it would take approximately 17 h 36 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Piea and Doubleview?
Doubleview has 7 hours ahead of Piea. Piea uses UTC+01:00 and Doubleview uses UTC+08:00.
What is the halfway point between Piea and Doubleview?
The geographic midpoint between Piea and Doubleview is near Puerto Villamil, Ecuador, roughly 6,883 km from each city.
In which direction is Doubleview from Piea?
Doubleview lies to the east-southeast of Piea, at an initial bearing of 103°.