Distance from Poolesville to Ramsau

🇺🇸 Poolesville, United States🇩🇪 Ramsau, Germany

Poolesville → Ramsau
6,864 km
4,265 miles · 3,706 nautical miles
PoolesvilleRamsau
9 h 2 min
Flight (if direct)
4 d 3 h
Driving time (est.)
northeast
Direction (49°)
+6 h
Time difference

About this route

Spanning 6,864 km (4,265 miles), the route from Poolesville to Ramsau is a genuine long-haul journey crossing multiple time zones. Where a non-stop flight is available, it would take roughly 9 h 2 min — otherwise expect at least one connection.

The geographic midpoint of the route lies near Port McNeill, Canada.

MetricValue
Straight-line distance6,864 km / 4,265 mi / 3,706 nmi
Estimated road distance8,923 km / 5,545 mi
Estimated flight time9 h 2 min — if a direct flight operates (805 km/h cruise)
Estimated driving time4 d 3 h (90 km/h average)
Initial bearing49° — northeast
Geographic midpointNear Port McNeill, Canada
Time differenceRamsau is +6 h (UTC-05:00 → UTC+01:00)
Poolesville coordinates39.1459, -77.4169
Ramsau coordinates48.1728, 12.2296

Flight and driving times are estimates. A direct flight may not be available between Poolesville and Ramsau — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Ramsau to Poolesville All distances from Poolesville All distances from Ramsau

Frequently asked questions

How far is Ramsau from Poolesville?
Ramsau is 6,864 km (4,265 miles) from Poolesville measured as a straight line (great-circle distance). The estimated road distance is about 8,923 km (5,545 mi).
How long is the flight from Poolesville to Ramsau?
If a direct flight operates between Poolesville and Ramsau, it would take approximately 9 h 2 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Poolesville and Ramsau?
Ramsau has 6 hours ahead of Poolesville. Poolesville uses UTC-05:00 and Ramsau uses UTC+01:00.
What is the halfway point between Poolesville and Ramsau?
The geographic midpoint between Poolesville and Ramsau is near Port McNeill, Canada, roughly 3,432 km from each city.
In which direction is Ramsau from Poolesville?
Ramsau lies to the northeast of Poolesville, at an initial bearing of 49°.