Distance from Risco to Brandermill
Risco → Brandermill
6,166 km
≈ 3,832 miles · 3,330 nautical miles
RiscoBrandermill
8 h 10 min
Flight (if direct)
3 d 17 h
Driving time (est.)
west-northwest
Direction (293°)
-6 h
Time difference
About this route
Spanning 6,166 km (3,832 miles), the route from Risco to Brandermill is a genuine long-haul journey crossing multiple time zones. Where a non-stop flight is available, it would take roughly 8 h 10 min — otherwise expect at least one connection.
The geographic midpoint of the route lies near Hoboksar, China.
| Metric | Value |
|---|---|
| Straight-line distance | 6,166 km / 3,832 mi / 3,330 nmi |
| Estimated road distance | 8,016 km / 4,981 mi |
| Estimated flight time | 8 h 10 min — if a direct flight operates (805 km/h cruise) |
| Estimated driving time | 3 d 17 h (90 km/h average) |
| Initial bearing | 293° — west-northwest |
| Geographic midpoint | Near Hoboksar, China |
| Time difference | Brandermill is -6 h (UTC+01:00 → UTC-05:00) |
| Risco coordinates | 38.8865, -5.1119 |
| Brandermill coordinates | 37.4321, -77.6497 |
Flight and driving times are estimates. A direct flight may not be available between Risco and Brandermill — actual travel can require connections, and road routes are longer than the straight line.
↔ Reverse: Brandermill to Risco All distances from Risco All distances from Brandermill
Distance from Risco to places near Brandermill
Frequently asked questions
How far is Brandermill from Risco?
Brandermill is 6,166 km (3,832 miles) from Risco measured as a straight line (great-circle distance). The estimated road distance is about 8,016 km (4,981 mi).
How long is the flight from Risco to Brandermill?
If a direct flight operates between Risco and Brandermill, it would take approximately 8 h 10 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Risco and Brandermill?
Brandermill has 6 hours behind Risco. Risco uses UTC+01:00 and Brandermill uses UTC-05:00.
What is the halfway point between Risco and Brandermill?
The geographic midpoint between Risco and Brandermill is near Hoboksar, China, roughly 3,083 km from each city.
In which direction is Brandermill from Risco?
Brandermill lies to the west-northwest of Risco, at an initial bearing of 293°.