Distance from Risco to Dublin
Risco → Dublin
9,331 km
≈ 5,798 miles · 5,038 nautical miles
RiscoDublin
12 h 5 min
Flight (if direct)
5 d 14 h
Driving time (est.)
northwest
Direction (315°)
-9 h
Time difference
About this route
Spanning 9,331 km (5,798 miles), the route from Risco to Dublin is a genuine long-haul journey crossing multiple time zones. Where a non-stop flight is available, it would take roughly 12 h 5 min — otherwise expect at least one connection.
The geographic midpoint of the route lies near Jince, Czech Republic.
| Metric | Value |
|---|---|
| Straight-line distance | 9,331 km / 5,798 mi / 5,038 nmi |
| Estimated road distance | 12,130 km / 7,537 mi |
| Estimated flight time | 12 h 5 min — if a direct flight operates (805 km/h cruise) |
| Estimated driving time | 5 d 14 h (90 km/h average) |
| Initial bearing | 315° — northwest |
| Geographic midpoint | Near Jince, Czech Republic |
| Time difference | Dublin is -9 h (UTC+01:00 → UTC-08:00) |
| Risco coordinates | 38.8865, -5.1119 |
| Dublin coordinates | 37.7022, -121.9358 |
Flight and driving times are estimates. A direct flight may not be available between Risco and Dublin — actual travel can require connections, and road routes are longer than the straight line.
↔ Reverse: Dublin to Risco All distances from Risco All distances from Dublin
Distance from Risco to places near Dublin
Frequently asked questions
How far is Dublin from Risco?
Dublin is 9,331 km (5,798 miles) from Risco measured as a straight line (great-circle distance). The estimated road distance is about 12,130 km (7,537 mi).
How long is the flight from Risco to Dublin?
If a direct flight operates between Risco and Dublin, it would take approximately 12 h 5 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Risco and Dublin?
Dublin has 9 hours behind Risco. Risco uses UTC+01:00 and Dublin uses UTC-08:00.
What is the halfway point between Risco and Dublin?
The geographic midpoint between Risco and Dublin is near Jince, Czech Republic, roughly 4,665 km from each city.
In which direction is Dublin from Risco?
Dublin lies to the northwest of Risco, at an initial bearing of 315°.