Distance from Risdon Vale to Åneby

🇦🇺 Risdon Vale, Australia🇳🇴 Åneby, Norway

Risdon Vale → Åneby
16,534 km
10,273 miles · 8,927 nautical miles
Risdon ValeÅneby
21 h 2 min
Flight (if direct)
9 d 22 h
Driving time (est.)
northwest
Direction (319°)
-10 h
Time difference

About this route

Spanning 16,534 km (10,273 miles), the route from Risdon Vale to Åneby is a genuine long-haul journey crossing multiple time zones. Where a non-stop flight is available, it would take roughly 21 h 2 min — otherwise expect at least one connection.

The geographic midpoint of the route lies near Kekaha, United States.

MetricValue
Straight-line distance16,534 km / 10,273 mi / 8,927 nmi
Estimated road distance21,494 km / 13,355 mi
Estimated flight time21 h 2 min — if a direct flight operates (805 km/h cruise)
Estimated driving time9 d 22 h (90 km/h average)
Initial bearing319° — northwest
Geographic midpointNear Kekaha, United States
Time differenceÅneby is -10 h (UTC+11:00 → UTC+01:00)
Risdon Vale coordinates-42.8124, 147.3565
Åneby coordinates60.0893, 10.87

Flight and driving times are estimates. A direct flight may not be available between Risdon Vale and Åneby — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Åneby to Risdon Vale All distances from Risdon Vale All distances from Åneby

Frequently asked questions

How far is Åneby from Risdon Vale?
Åneby is 16,534 km (10,273 miles) from Risdon Vale measured as a straight line (great-circle distance). The estimated road distance is about 21,494 km (13,355 mi).
How long is the flight from Risdon Vale to Åneby?
If a direct flight operates between Risdon Vale and Åneby, it would take approximately 21 h 2 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Risdon Vale and Åneby?
Åneby has 10 hours behind Risdon Vale. Risdon Vale uses UTC+11:00 and Åneby uses UTC+01:00.
What is the halfway point between Risdon Vale and Åneby?
The geographic midpoint between Risdon Vale and Åneby is near Kekaha, United States, roughly 8,267 km from each city.
In which direction is Åneby from Risdon Vale?
Åneby lies to the northwest of Risdon Vale, at an initial bearing of 319°.