Distance from Risdon Vale to Buffalo County

🇦🇺 Risdon Vale, Australia🇺🇸 Buffalo County, United States

Risdon Vale → Buffalo County
14,792 km
9,191 miles · 7,987 nautical miles
Risdon ValeBuffalo County
18 h 53 min
Flight (if direct)
8 d 21 h
Driving time (est.)
east-northeast
Direction (64°)
-17 h
Time difference

About this route

Spanning 14,792 km (9,191 miles), the route from Risdon Vale to Buffalo County is a genuine long-haul journey crossing multiple time zones. Where a non-stop flight is available, it would take roughly 18 h 53 min — otherwise expect at least one connection.

The geographic midpoint of the route lies near Jimsar, China.

MetricValue
Straight-line distance14,792 km / 9,191 mi / 7,987 nmi
Estimated road distance19,230 km / 11,949 mi
Estimated flight time18 h 53 min — if a direct flight operates (805 km/h cruise)
Estimated driving time8 d 21 h (90 km/h average)
Initial bearing64° — east-northeast
Geographic midpointNear Jimsar, China
Time differenceBuffalo County is -17 h (UTC+11:00 → UTC-06:00)
Risdon Vale coordinates-42.8124, 147.3565
Buffalo County coordinates44.0764, -99.205

Flight and driving times are estimates. A direct flight may not be available between Risdon Vale and Buffalo County — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Buffalo County to Risdon Vale All distances from Risdon Vale All distances from Buffalo County

Frequently asked questions

How far is Buffalo County from Risdon Vale?
Buffalo County is 14,792 km (9,191 miles) from Risdon Vale measured as a straight line (great-circle distance). The estimated road distance is about 19,230 km (11,949 mi).
How long is the flight from Risdon Vale to Buffalo County?
If a direct flight operates between Risdon Vale and Buffalo County, it would take approximately 18 h 53 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Risdon Vale and Buffalo County?
Buffalo County has 17 hours behind Risdon Vale. Risdon Vale uses UTC+11:00 and Buffalo County uses UTC-06:00.
What is the halfway point between Risdon Vale and Buffalo County?
The geographic midpoint between Risdon Vale and Buffalo County is near Jimsar, China, roughly 7,396 km from each city.
In which direction is Buffalo County from Risdon Vale?
Buffalo County lies to the east-northeast of Risdon Vale, at an initial bearing of 64°.