Distance from Timmaspe to Antony
Timmaspe → Antony
797 km
≈ 495 miles · 430 nautical miles
TimmaspeAntony
1 h 29 min
Flight (if direct)
11 h 30 min
Driving time (est.)
southwest
Direction (224°)
0 h
Time difference
About this route
Travelling from Timmaspe to Antony covers 797 km (495 miles) on a great-circle path — a distance where flying saves many hours compared with the estimated 1,036 km by road.
The geographic midpoint of the route lies near Jince, Czech Republic.
| Metric | Value |
|---|---|
| Straight-line distance | 797 km / 495 mi / 430 nmi |
| Estimated road distance | 1,036 km / 643 mi |
| Estimated flight time | 1 h 29 min — if a direct flight operates (805 km/h cruise) |
| Estimated driving time | 11 h 30 min (90 km/h average) |
| Initial bearing | 224° — southwest |
| Geographic midpoint | Near Jince, Czech Republic |
| Time difference | Same time zone offset (UTC+01:00 → UTC+01:00) |
| Timmaspe coordinates | 54.1397, 9.8943 |
| Antony coordinates | 48.7533, 2.2967 |
Flight and driving times are estimates. A direct flight may not be available between Timmaspe and Antony — actual travel can require connections, and road routes are longer than the straight line.
↔ Reverse: Antony to Timmaspe All distances from Timmaspe All distances from Antony
Distance from Timmaspe to places near Antony
Frequently asked questions
How far is Antony from Timmaspe?
Antony is 797 km (495 miles) from Timmaspe measured as a straight line (great-circle distance). The estimated road distance is about 1,036 km (643 mi).
How long is the flight from Timmaspe to Antony?
If a direct flight operates between Timmaspe and Antony, it would take approximately 1 h 29 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Timmaspe and Antony?
Antony has the same time zone offset. Timmaspe uses UTC+01:00 and Antony uses UTC+01:00.
What is the halfway point between Timmaspe and Antony?
The geographic midpoint between Timmaspe and Antony is near Jince, Czech Republic, roughly 398 km from each city.
In which direction is Antony from Timmaspe?
Antony lies to the southwest of Timmaspe, at an initial bearing of 224°.