Distance from Ullensaker to Strozza
Ullensaker → Strozza
1,601 km
≈ 995 miles · 865 nautical miles
UllensakerStrozza
2 h 29 min
Flight (if direct)
23 h 8 min
Driving time (est.)
south
Direction (184°)
0 h
Time difference
About this route
The straight-line distance from Ullensaker to Strozza is 1,601 km (995 miles). At this scale, air travel is the practical choice — if a direct flight operates, it would take around 2 h 29 min.
The geographic midpoint of the route lies near Jince, Czech Republic.
| Metric | Value |
|---|---|
| Straight-line distance | 1,601 km / 995 mi / 865 nmi |
| Estimated road distance | 2,082 km / 1,294 mi |
| Estimated flight time | 2 h 29 min — if a direct flight operates (805 km/h cruise) |
| Estimated driving time | 23 h 8 min (90 km/h average) |
| Initial bearing | 184° — south |
| Geographic midpoint | Near Jince, Czech Republic |
| Time difference | Same time zone offset (UTC+01:00 → UTC+01:00) |
| Ullensaker coordinates | 60.144, 11.1744 |
| Strozza coordinates | 45.7729, 9.5789 |
Flight and driving times are estimates. A direct flight may not be available between Ullensaker and Strozza — actual travel can require connections, and road routes are longer than the straight line.
↔ Reverse: Strozza to Ullensaker All distances from Ullensaker All distances from Strozza
Distance from Ullensaker to places near Strozza
Frequently asked questions
How far is Strozza from Ullensaker?
Strozza is 1,601 km (995 miles) from Ullensaker measured as a straight line (great-circle distance). The estimated road distance is about 2,082 km (1,294 mi).
How long is the flight from Ullensaker to Strozza?
If a direct flight operates between Ullensaker and Strozza, it would take approximately 2 h 29 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Ullensaker and Strozza?
Strozza has the same time zone offset. Ullensaker uses UTC+01:00 and Strozza uses UTC+01:00.
What is the halfway point between Ullensaker and Strozza?
The geographic midpoint between Ullensaker and Strozza is near Jince, Czech Republic, roughly 801 km from each city.
In which direction is Strozza from Ullensaker?
Strozza lies to the south of Ullensaker, at an initial bearing of 184°.