Distance from Ormea to Onzo

🇮🇹 Ormea, Italy🇮🇹 Onzo, Italy

Ormea → Onzo
14 km
9 miles · 7 nautical miles
OrmeaOnzo
31 min
Flight (if direct)
12 min
Driving time (est.)
southeast
Direction (134°)
0 h
Time difference

About this route

Ormea and Onzo are close neighbours — just 14 km apart as the crow flies, a trip most people would make by road rather than by air.

The geographic midpoint of the route lies near Möst, Mongolia.

MetricValue
Straight-line distance14 km / 9 mi / 7 nmi
Estimated road distance18 km / 11 mi
Estimated flight time31 min — if a direct flight operates (805 km/h cruise)
Estimated driving time12 min (90 km/h average)
Initial bearing134° — southeast
Geographic midpointNear Möst, Mongolia
Time differenceSame time zone offset (UTC+01:00 → UTC+01:00)
Ormea coordinates44.1559, 7.9281
Onzo coordinates44.0701, 8.0523

Flight and driving times are estimates. A direct flight may not be available between Ormea and Onzo — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Onzo to Ormea All distances from Ormea All distances from Onzo

Frequently asked questions

How far is Onzo from Ormea?
Onzo is 14 km (9 miles) from Ormea measured as a straight line (great-circle distance). The estimated road distance is about 18 km (11 mi).
How long is the flight from Ormea to Onzo?
If a direct flight operates between Ormea and Onzo, it would take approximately 31 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Ormea and Onzo?
Onzo has the same time zone offset. Ormea uses UTC+01:00 and Onzo uses UTC+01:00.
What is the halfway point between Ormea and Onzo?
The geographic midpoint between Ormea and Onzo is near Möst, Mongolia, roughly 7 km from each city.
In which direction is Onzo from Ormea?
Onzo lies to the southeast of Ormea, at an initial bearing of 134°.