Distance from Ormea to Alto

🇮🇹 Ormea, Italy🇮🇹 Alto, Italy

Ormea → Alto
8 km
5 miles · 4 nautical miles
OrmeaAlto
31 min
Flight (if direct)
7 min
Driving time (est.)
southeast
Direction (132°)
0 h
Time difference

About this route

Ormea and Alto are close neighbours — just 8 km apart as the crow flies, a trip most people would make by road rather than by air.

The geographic midpoint of the route lies near Antigo, United States.

MetricValue
Straight-line distance8 km / 5 mi / 4 nmi
Estimated road distance10 km / 6 mi
Estimated flight time31 min — if a direct flight operates (805 km/h cruise)
Estimated driving time7 min (90 km/h average)
Initial bearing132° — southeast
Geographic midpointNear Antigo, United States
Time differenceSame time zone offset (UTC+01:00 → UTC+01:00)
Ormea coordinates44.1559, 7.9281
Alto coordinates44.1086, 8.0022

Flight and driving times are estimates. A direct flight may not be available between Ormea and Alto — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Alto to Ormea All distances from Ormea All distances from Alto

Frequently asked questions

How far is Alto from Ormea?
Alto is 8 km (5 miles) from Ormea measured as a straight line (great-circle distance). The estimated road distance is about 10 km (6 mi).
How long is the flight from Ormea to Alto?
If a direct flight operates between Ormea and Alto, it would take approximately 31 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Ormea and Alto?
Alto has the same time zone offset. Ormea uses UTC+01:00 and Alto uses UTC+01:00.
What is the halfway point between Ormea and Alto?
The geographic midpoint between Ormea and Alto is near Antigo, United States, roughly 4 km from each city.
In which direction is Alto from Ormea?
Alto lies to the southeast of Ormea, at an initial bearing of 132°.