Distance from Viimsi to Loo

🇪🇪 Viimsi, Estonia🇪🇪 Loo, Estonia

Viimsi → Loo
10 km
6 miles · 5 nautical miles
ViimsiLoo
31 min
Flight (if direct)
9 min
Driving time (est.)
southeast
Direction (145°)
0 h
Time difference

About this route

Viimsi and Loo are close neighbours — just 10 km apart as the crow flies, a trip most people would make by road rather than by air.

The geographic midpoint of the route lies near Hoboksar, China.

MetricValue
Straight-line distance10 km / 6 mi / 5 nmi
Estimated road distance13 km / 8 mi
Estimated flight time31 min — if a direct flight operates (805 km/h cruise)
Estimated driving time9 min (90 km/h average)
Initial bearing145° — southeast
Geographic midpointNear Hoboksar, China
Time differenceSame time zone offset (UTC+02:00 → UTC+02:00)
Viimsi coordinates59.505, 24.8481
Loo coordinates59.4312, 24.9495

Flight and driving times are estimates. A direct flight may not be available between Viimsi and Loo — actual travel can require connections, and road routes are longer than the straight line.

Reverse: Loo to Viimsi All distances from Viimsi All distances from Loo

Frequently asked questions

How far is Loo from Viimsi?
Loo is 10 km (6 miles) from Viimsi measured as a straight line (great-circle distance). The estimated road distance is about 13 km (8 mi).
How long is the flight from Viimsi to Loo?
If a direct flight operates between Viimsi and Loo, it would take approximately 31 min, based on an average cruising speed of 805 km/h (500 mph) plus 30 minutes for take-off and landing. Note that a direct flight may not be available on this route — actual travel may require a connecting flight or another mode of transport.
What is the time difference between Viimsi and Loo?
Loo has the same time zone offset. Viimsi uses UTC+02:00 and Loo uses UTC+02:00.
What is the halfway point between Viimsi and Loo?
The geographic midpoint between Viimsi and Loo is near Hoboksar, China, roughly 5 km from each city.
In which direction is Loo from Viimsi?
Loo lies to the southeast of Viimsi, at an initial bearing of 145°.